Welcome to our new site, if you can’t find what you’re looking for please get in touch via our contact us page.
NAS set of angled fine needle probes two of each
Micro-Tec NAS set of angled fine needle probes, stainless steel, two each Ø0.25, 0.35, 0.45 and 0.55mm (set/8)
£6.47
Related products
-
NA4 angled fine needle probe, diameter 0.45mm – stainless steel
Micro-Tec NA4 angled fine needle probe Ø0.45mm, stainless steel – 35mm long (pkg/10)
£6.47 Add to basket
NA4 angled fine needle probe, diameter 0.45mm – stainless steel
Micro-Tec NA4 angled fine needle probe Ø0.45mm, stainless steel – 35mm long (pkg/10)
£6.47 -
NA5 angled fine needle probe diameter0.55mm stainless steel
Micro-Tec NA5 angled fine needle probe Ø0.55mm, stainless steel – 35mm long (pkg/10)
£6.59 Add to basket
NA5 angled fine needle probe diameter0.55mm stainless steel
Micro-Tec NA5 angled fine needle probe Ø0.55mm, stainless steel – 35mm long (pkg/10)
£6.59 -
ST-010 object slide table
ST-010 specimen stage for microscopy slides. Comprises base plate connected to the tilt and height adjustable specimen table of the CCU-010 base unit. For two microscopy slides 76 x 26mm or one slide 76 x 52mm. Can also be used for coverslips. Twelve M2 threaded holes for S-clips. Two FTM quartz crystal positions (centre and edge). Six mounting clips M2 included.
Price On Request £0.00 Add to basket
ST-010 object slide table
ST-010 specimen stage for microscopy slides. Comprises base plate connected to the tilt and height adjustable specimen table of the CCU-010 base unit. For two microscopy slides 76 x 26mm or one slide 76 x 52mm. Can also be used for coverslips. Twelve M2 threaded holes for S-clips. Two FTM quartz crystal positions (centre and edge). Six mounting clips M2 included.
£0.00Price On Request -
PS-006 planetary gear table
Consisting of base plate for connection to the tilt and height adjustable specimen table of the CCU-010 base unit. Specimen holders for six large (Ø 25.4mm) or six small (Ø12.7mm) SEM pin stubs. DC micro-motor for rotation and planetary movement, quartz sensor (centre), speed control: 0-100%, rotation: 0-20rpm approximately, planets: 0-65rpm approximately
Price On Request £0.00 Add to basket
PS-006 planetary gear table
Consisting of base plate for connection to the tilt and height adjustable specimen table of the CCU-010 base unit. Specimen holders for six large (Ø 25.4mm) or six small (Ø12.7mm) SEM pin stubs. DC micro-motor for rotation and planetary movement, quartz sensor (centre), speed control: 0-100%, rotation: 0-20rpm approximately, planets: 0-65rpm approximately
£0.00Price On Request