Welcome to our new site, if you can’t find what you’re looking for please get in touch via our contact us page.
Sampler with pin stub and conductive tab in a storage tube
EM-Tec FS1 sampler with Ø12.7mm pin stub and Ø12mm high purity conductive tab in a SB2 storage tube (each)
£2.06
Related products
-
Box with pin stubs plus non-conductive tabs in tubes
EM-Tec LM11 box with 10 x Ø12.7mm pin stubs plus Ø12mm non- conductive tabs in SB2 storage tubes (each)
£17.86 Add to basket
Box with pin stubs plus non-conductive tabs in tubes
EM-Tec LM11 box with 10 x Ø12.7mm pin stubs plus Ø12mm non- conductive tabs in SB2 storage tubes (each)
£17.86 -
Box with 10 x Ø12.7mm pin stubs in storage tubes (no tabs)
EM-Tec FS10 box with 10 x Ø12.7mm pin stubs in SB2 storage tubes (no tabs) (each)
£8.01 Add to basket
Box with 10 x Ø12.7mm pin stubs in storage tubes (no tabs)
EM-Tec FS10 box with 10 x Ø12.7mm pin stubs in SB2 storage tubes (no tabs) (each)
£8.01 -
CCU-010 HV (high vacuum)
The Safematic CCU-010 HV vacuum coater is suitable for both SEM and TEM sputter coating and carbon coating applications.
Price On Request £0.00 Add to basket
CCU-010 HV (high vacuum)
The Safematic CCU-010 HV vacuum coater is suitable for both SEM and TEM sputter coating and carbon coating applications.
£0.00Price On Request -
CCU-010 LV (standard vacuum)
Safematic CCU-010 LV compact, fully automatic standard vacuum coating system. Including dual-position terminating film thickness monitoring system. Please note that for a complete working system the CCU-010LV requires the following: backing rotary vacuum pump (A65201903), oil mist filter (A46226000) and pumping hose (C10514297). Select coating head option SP-010 (sputteringing), CT-010 (carbon evaporation) or both. Select required sputtering target(s). Detailed description: • glass work chamber- 104 mm Ø x 106 mm (DN 100 ISO-KF compatible)• implosion guard and safety monitoring• table (Ø 80 mm) – tilt and height adjustable • multi-sample holder for 20 standard (13 mm) pin stubs to meet most requirements• film thickness monitor (FTM) based on a quartz crystal oscillator- usable in two positions (centre/edge)• full range power supply (90-260VAC- 50/60Hz)• coating process head interface (gas and electric) including automatic detection• 5.7“ TFT touch display• recipe-driven user interface for guaranteed reproducible results• storage / view of the last ten coating processes• automatic vent of the system when power failures – prevents backstreaming of oil from the rotary pump• intuitive operator’s software• graphic display of process data with Windows-based software Coating LAB (option)• flange connection (KF25) for connection of an external roughing pump• external alarm connector• USB service interface for easy analysis and software upgrades• automatic valve control for two process gases and venting• operating manual
Price On Request £0.00 Add to basket
CCU-010 LV (standard vacuum)
Safematic CCU-010 LV compact, fully automatic standard vacuum coating system. Including dual-position terminating film thickness monitoring system. Please note that for a complete working system the CCU-010LV requires the following: backing rotary vacuum pump (A65201903), oil mist filter (A46226000) and pumping hose (C10514297). Select coating head option SP-010 (sputteringing), CT-010 (carbon evaporation) or both. Select required sputtering target(s). Detailed description: • glass work chamber- 104 mm Ø x 106 mm (DN 100 ISO-KF compatible)• implosion guard and safety monitoring• table (Ø 80 mm) – tilt and height adjustable • multi-sample holder for 20 standard (13 mm) pin stubs to meet most requirements• film thickness monitor (FTM) based on a quartz crystal oscillator- usable in two positions (centre/edge)• full range power supply (90-260VAC- 50/60Hz)• coating process head interface (gas and electric) including automatic detection• 5.7“ TFT touch display• recipe-driven user interface for guaranteed reproducible results• storage / view of the last ten coating processes• automatic vent of the system when power failures – prevents backstreaming of oil from the rotary pump• intuitive operator’s software• graphic display of process data with Windows-based software Coating LAB (option)• flange connection (KF25) for connection of an external roughing pump• external alarm connector• USB service interface for easy analysis and software upgrades• automatic valve control for two process gases and venting• operating manual
£0.00Price On Request