Welcome to our new site, if you can’t find what you’re looking for please get in touch via our contact us page.
Cryo low current measurement kit
Cryo Low-Current measurement Kit – A plug-in tool for the MM3A-EM to allow low-current- low-capacity measurements on conductive samples in a cryo environment. Each kit consists of a probe tip holder- vacuum and air-side triax cabling and a vacuum feedthrough. A vacuum flange and an operator’s handbook is also included with each delivery. One kit required per MM3A.
£0.00
Related products
-
Carbon fibre thread on coil – 2m
High purity carbon fibre thread on coil, 2 metre.
Price On Request £0.00 Add to basket
Carbon fibre thread on coil – 2m
High purity carbon fibre thread on coil, 2 metre.
£0.00Price On Request -
CCU-010 LV (standard vacuum)
Safematic CCU-010 LV compact, fully automatic standard vacuum coating system. Including dual-position terminating film thickness monitoring system. Please note that for a complete working system the CCU-010LV requires the following: backing rotary vacuum pump (A65201903), oil mist filter (A46226000) and pumping hose (C10514297). Select coating head option SP-010 (sputteringing), CT-010 (carbon evaporation) or both. Select required sputtering target(s). Detailed description: • glass work chamber- 104 mm Ø x 106 mm (DN 100 ISO-KF compatible)• implosion guard and safety monitoring• table (Ø 80 mm) – tilt and height adjustable • multi-sample holder for 20 standard (13 mm) pin stubs to meet most requirements• film thickness monitor (FTM) based on a quartz crystal oscillator- usable in two positions (centre/edge)• full range power supply (90-260VAC- 50/60Hz)• coating process head interface (gas and electric) including automatic detection• 5.7“ TFT touch display• recipe-driven user interface for guaranteed reproducible results• storage / view of the last ten coating processes• automatic vent of the system when power failures – prevents backstreaming of oil from the rotary pump• intuitive operator’s software• graphic display of process data with Windows-based software Coating LAB (option)• flange connection (KF25) for connection of an external roughing pump• external alarm connector• USB service interface for easy analysis and software upgrades• automatic valve control for two process gases and venting• operating manual
Price On Request £0.00 Add to basket
CCU-010 LV (standard vacuum)
Safematic CCU-010 LV compact, fully automatic standard vacuum coating system. Including dual-position terminating film thickness monitoring system. Please note that for a complete working system the CCU-010LV requires the following: backing rotary vacuum pump (A65201903), oil mist filter (A46226000) and pumping hose (C10514297). Select coating head option SP-010 (sputteringing), CT-010 (carbon evaporation) or both. Select required sputtering target(s). Detailed description: • glass work chamber- 104 mm Ø x 106 mm (DN 100 ISO-KF compatible)• implosion guard and safety monitoring• table (Ø 80 mm) – tilt and height adjustable • multi-sample holder for 20 standard (13 mm) pin stubs to meet most requirements• film thickness monitor (FTM) based on a quartz crystal oscillator- usable in two positions (centre/edge)• full range power supply (90-260VAC- 50/60Hz)• coating process head interface (gas and electric) including automatic detection• 5.7“ TFT touch display• recipe-driven user interface for guaranteed reproducible results• storage / view of the last ten coating processes• automatic vent of the system when power failures – prevents backstreaming of oil from the rotary pump• intuitive operator’s software• graphic display of process data with Windows-based software Coating LAB (option)• flange connection (KF25) for connection of an external roughing pump• external alarm connector• USB service interface for easy analysis and software upgrades• automatic valve control for two process gases and venting• operating manual
£0.00Price On Request -
Rotary support for PS-006
Rotary support for use with the PS-006 planetary gear stage. Includes slip-on specimen holder which converts the planetary gear stage into a rotary stage. Twelve M2 threads for mounting specimens or for the using S-clips. Six mounting clips M2 included.
Price On Request £0.00 Add to basket
Rotary support for PS-006
Rotary support for use with the PS-006 planetary gear stage. Includes slip-on specimen holder which converts the planetary gear stage into a rotary stage. Twelve M2 threads for mounting specimens or for the using S-clips. Six mounting clips M2 included.
£0.00Price On Request -
High vacuum (HV) upgrade kit I
Upgrade kit for converting CCU-010 LV to high vacuum CCU-010 HV specification. Includes turbomolecular pump (Pfeiffer Hi Pace 80), conversion kit, cable and other small components. Note: the rotary vacuum pump used with the LV version will be required to “back” the internally mounted turbomolecular pump.
Price On Request £0.00 Add to basket
High vacuum (HV) upgrade kit I
Upgrade kit for converting CCU-010 LV to high vacuum CCU-010 HV specification. Includes turbomolecular pump (Pfeiffer Hi Pace 80), conversion kit, cable and other small components. Note: the rotary vacuum pump used with the LV version will be required to “back” the internally mounted turbomolecular pump.
£0.00Price On Request