CCU-010 HV (high vacuum)
The Safematic CCU-010 HV vacuum coater is suitable for both SEM and TEM sputter coating and carbon coating applications.
£0.00
Safematic CCU-010 HV compact, fully automatic, high vacuum (oil-free) coating system. Key highlights:
- Integrated turbomolecular and membrane pumping (no external pump and vacuum hose)
- Small footprint (L 570 x W 360 x H 350mm)
- Superb vacuum performance (to 5 x 10-5mbar in minutes, ultimate vacuum in 10-6mbar range)
- Safety: implosion guard with placement sensor so coater cannot be operated unless the guard is in place
- Easy access to specimen chamber for cleaning – removed in seconds for complete complete cleaning. Especially important if sputtering and carbon evaporation are being used
- Integrated terminating film thickness monitoring system. With two-location crystal holder to accommodate different sample sizes
- Optional sputtering module (SP010) is actively (fan) cooled to allow run times of up to 40 minutes
- Optional carbon evaporation module (CT010) uses a unique carbon fibre spooling system to allow up to 50 coating runs without a source change
- System can be left under vacuum when not in use.
Note: for a complete working system please select coating head option SP-010 (sputtering), CT-010 (carbon evaporation) or both. Detailed description:
- glass work chamber 104 mm Ø x 106 mm (DN 100 ISO-KF compatible)
- implosion guard and safety monitoring
- table (Ø80 mm)- tilt and height adjustable
- multi-sample holder for 20 standard (13 mm) pin stubs to meet most requirements
- dual-film thickness monitor (FTM) based on a quartz crystal oscillator- usable in two positions (centre/edge)
- integrated membrane pump (Vacuubrand MD 1 Vario-SP)
- integrated turbomolecular pump (Pfeiffer Hi Pace 80)
- full range power supply (90-260VAC- 50/60Hz)
- coating process head interface (gas and electric) including automatic detection
- 5.7“ TFT touch display
- recipe-driven user interface for guaranteed reproducible results
- storage / view of the last ten coating processes
- automatic vent of the system when power failures
- intuitive operator’s software
- graphic display of process data with Windows-based software Coating LAB (option)
- external alarm connector
- USB service interface for easy analysis and software upgrades
- automatic valve control for two process gases and venting
- operating manual
- A comprehensive on-site instrument service prior to the expiration of warranty.
You may also like…
-
CCU-010 LV (standard vacuum)
Safematic CCU-010 LV compact, fully automatic standard vacuum coating system. Including dual-position terminating film thickness monitoring system. Please note that for a complete working system the CCU-010LV requires the following: backing rotary vacuum pump (A65201903), oil mist filter (A46226000) and pumping hose (C10514297). Select coating head option SP-010 (sputteringing), CT-010 (carbon evaporation) or both. Select required sputtering target(s). Detailed description: • glass work chamber- 104 mm Ø x 106 mm (DN 100 ISO-KF compatible)• implosion guard and safety monitoring• table (Ø 80 mm) – tilt and height adjustable • multi-sample holder for 20 standard (13 mm) pin stubs to meet most requirements• film thickness monitor (FTM) based on a quartz crystal oscillator- usable in two positions (centre/edge)• full range power supply (90-260VAC- 50/60Hz)• coating process head interface (gas and electric) including automatic detection• 5.7“ TFT touch display• recipe-driven user interface for guaranteed reproducible results• storage / view of the last ten coating processes• automatic vent of the system when power failures – prevents backstreaming of oil from the rotary pump• intuitive operator’s software• graphic display of process data with Windows-based software Coating LAB (option)• flange connection (KF25) for connection of an external roughing pump• external alarm connector• USB service interface for easy analysis and software upgrades• automatic valve control for two process gases and venting• operating manual
Price On Request £0.00 Add to basket
CCU-010 LV (standard vacuum)
Safematic CCU-010 LV compact, fully automatic standard vacuum coating system. Including dual-position terminating film thickness monitoring system. Please note that for a complete working system the CCU-010LV requires the following: backing rotary vacuum pump (A65201903), oil mist filter (A46226000) and pumping hose (C10514297). Select coating head option SP-010 (sputteringing), CT-010 (carbon evaporation) or both. Select required sputtering target(s). Detailed description: • glass work chamber- 104 mm Ø x 106 mm (DN 100 ISO-KF compatible)• implosion guard and safety monitoring• table (Ø 80 mm) – tilt and height adjustable • multi-sample holder for 20 standard (13 mm) pin stubs to meet most requirements• film thickness monitor (FTM) based on a quartz crystal oscillator- usable in two positions (centre/edge)• full range power supply (90-260VAC- 50/60Hz)• coating process head interface (gas and electric) including automatic detection• 5.7“ TFT touch display• recipe-driven user interface for guaranteed reproducible results• storage / view of the last ten coating processes• automatic vent of the system when power failures – prevents backstreaming of oil from the rotary pump• intuitive operator’s software• graphic display of process data with Windows-based software Coating LAB (option)• flange connection (KF25) for connection of an external roughing pump• external alarm connector• USB service interface for easy analysis and software upgrades• automatic valve control for two process gases and venting• operating manual
£0.00Price On Request -
ET-010 integrated plasma stage
Plasma cleaning accessory for the pre-treatment (cleaning) or after-treatment (glow discharge effect) of specimens in combination with a coating process.
Price On Request £0.00 Add to basket
ET-010 integrated plasma stage
Plasma cleaning accessory for the pre-treatment (cleaning) or after-treatment (glow discharge effect) of specimens in combination with a coating process.
£0.00Price On Request -
CT-010 carbon coating module
Carbon fibre thread evaporation module with unique thread tracking system, allowing up to 50 coatings without having to break vacuum and replenish the carbon source. Controlled, automatic pulse evaporation modes give optimal coating control and film quality. Easy-fit electrical and pneumatic interface to CCU-010 LV and CCU-010 HV platforms. Includes one 300015 carbon thread on coil 2m.
Price On Request £0.00 Add to basket
CT-010 carbon coating module
Carbon fibre thread evaporation module with unique thread tracking system, allowing up to 50 coatings without having to break vacuum and replenish the carbon source. Controlled, automatic pulse evaporation modes give optimal coating control and film quality. Easy-fit electrical and pneumatic interface to CCU-010 LV and CCU-010 HV platforms. Includes one 300015 carbon thread on coil 2m.
£0.00Price On Request -
GD-010 glow discharge
Glow discharge attachment for hydrophilic/hydrophobic treatment (rendering) of substrates (e.g. TEM carbon support films). Fully integrated to allow post-treatment of carbon films without the need to break vacuum after carbon coating
Price On Request £0.00 Add to basket
GD-010 glow discharge
Glow discharge attachment for hydrophilic/hydrophobic treatment (rendering) of substrates (e.g. TEM carbon support films). Fully integrated to allow post-treatment of carbon films without the need to break vacuum after carbon coating
£0.00Price On Request
Related products
-
SP-010 sputtering module
Fully integrated magnetron (type A) sputtering module for standard sputtering rates. Including high resolution sputtering assembly. Fitted with target cooling and monitoring – automatic source shutter and electronically controlled process vacuum control. Note: sputtering target not included – please select required metat target(s) from the options list.
Price On Request £0.00 Add to basket
SP-010 sputtering module
Fully integrated magnetron (type A) sputtering module for standard sputtering rates. Including high resolution sputtering assembly. Fitted with target cooling and monitoring – automatic source shutter and electronically controlled process vacuum control. Note: sputtering target not included – please select required metat target(s) from the options list.
£0.00Price On Request -
RC-010 software for remote control of CCU-010
Windows-based RC-010 remote control software allows Safematic CCU-010 coaters to be run remotely for the control, monitoring and analysis of coating processes, for example in a glove box. The RC-010 comes ready with pre-defined recipes with optimal settings for the most common metal sputtering targets as well as for carbon. Requires connection from a laptop or computer (not supplied) to the CCU-010 coating system via a USB cable.
Price On Request £0.00 Add to basket
RC-010 software for remote control of CCU-010
Windows-based RC-010 remote control software allows Safematic CCU-010 coaters to be run remotely for the control, monitoring and analysis of coating processes, for example in a glove box. The RC-010 comes ready with pre-defined recipes with optimal settings for the most common metal sputtering targets as well as for carbon. Requires connection from a laptop or computer (not supplied) to the CCU-010 coating system via a USB cable.
£0.00Price On Request -
EMF10 mist filter
Edwards EMF10 oil mist filter suitable for use with an RV3 pump. Supplied with NW25 clamp, centering ring and O- ring- NW25 to 3/4 inch BSP adaptor.
£271.60 Add to basket
EMF10 mist filter
Edwards EMF10 oil mist filter suitable for use with an RV3 pump. Supplied with NW25 clamp, centering ring and O- ring- NW25 to 3/4 inch BSP adaptor.
£271.60 -
Rotary support for PS-006
Rotary support for use with the PS-006 planetary gear stage. Includes slip-on specimen holder which converts the planetary gear stage into a rotary stage. Twelve M2 threads for mounting specimens or for the using S-clips. Six mounting clips M2 included.
Price On Request £0.00 Add to basket
Rotary support for PS-006
Rotary support for use with the PS-006 planetary gear stage. Includes slip-on specimen holder which converts the planetary gear stage into a rotary stage. Twelve M2 threads for mounting specimens or for the using S-clips. Six mounting clips M2 included.
£0.00Price On Request