Welcome to our new site, if you can’t find what you’re looking for please get in touch via our contact us page.
Upgrade from standard 75W to 150W RF power supply
Increase RF power from 75W to 150W
£0.00
Related products
-
SP-011 sputtering module for high sputtering rates
SP-011 sputtering head module for applications where high sputtering rates are required
Price On Request £0.00 Add to basket
SP-011 sputtering module for high sputtering rates
SP-011 sputtering head module for applications where high sputtering rates are required
£0.00Price On Request -
RC-010 software for remote control of CCU-010
Windows-based RC-010 remote control software allows Safematic CCU-010 coaters to be run remotely for the control, monitoring and analysis of coating processes, for example in a glove box. The RC-010 comes ready with pre-defined recipes with optimal settings for the most common metal sputtering targets as well as for carbon. Requires connection from a laptop or computer (not supplied) to the CCU-010 coating system via a USB cable.
Price On Request £0.00 Add to basket
RC-010 software for remote control of CCU-010
Windows-based RC-010 remote control software allows Safematic CCU-010 coaters to be run remotely for the control, monitoring and analysis of coating processes, for example in a glove box. The RC-010 comes ready with pre-defined recipes with optimal settings for the most common metal sputtering targets as well as for carbon. Requires connection from a laptop or computer (not supplied) to the CCU-010 coating system via a USB cable.
£0.00Price On Request -
HS-010 head module storage box
HS-010 head storage box for maintaining sputtering or carbon modules under vacuum when not in use.
Price On Request £0.00 Add to basket
HS-010 head module storage box
HS-010 head storage box for maintaining sputtering or carbon modules under vacuum when not in use.
£0.00Price On Request -
CCU-010 LV (standard vacuum)
Safematic CCU-010 LV compact, fully automatic standard vacuum coating system. Including dual-position terminating film thickness monitoring system. Please note that for a complete working system the CCU-010LV requires the following: backing rotary vacuum pump (A65201903), oil mist filter (A46226000) and pumping hose (C10514297). Select coating head option SP-010 (sputteringing), CT-010 (carbon evaporation) or both. Select required sputtering target(s). Detailed description: • glass work chamber- 104 mm Ø x 106 mm (DN 100 ISO-KF compatible)• implosion guard and safety monitoring• table (Ø 80 mm) – tilt and height adjustable • multi-sample holder for 20 standard (13 mm) pin stubs to meet most requirements• film thickness monitor (FTM) based on a quartz crystal oscillator- usable in two positions (centre/edge)• full range power supply (90-260VAC- 50/60Hz)• coating process head interface (gas and electric) including automatic detection• 5.7“ TFT touch display• recipe-driven user interface for guaranteed reproducible results• storage / view of the last ten coating processes• automatic vent of the system when power failures – prevents backstreaming of oil from the rotary pump• intuitive operator’s software• graphic display of process data with Windows-based software Coating LAB (option)• flange connection (KF25) for connection of an external roughing pump• external alarm connector• USB service interface for easy analysis and software upgrades• automatic valve control for two process gases and venting• operating manual
Price On Request £0.00 Add to basket
CCU-010 LV (standard vacuum)
Safematic CCU-010 LV compact, fully automatic standard vacuum coating system. Including dual-position terminating film thickness monitoring system. Please note that for a complete working system the CCU-010LV requires the following: backing rotary vacuum pump (A65201903), oil mist filter (A46226000) and pumping hose (C10514297). Select coating head option SP-010 (sputteringing), CT-010 (carbon evaporation) or both. Select required sputtering target(s). Detailed description: • glass work chamber- 104 mm Ø x 106 mm (DN 100 ISO-KF compatible)• implosion guard and safety monitoring• table (Ø 80 mm) – tilt and height adjustable • multi-sample holder for 20 standard (13 mm) pin stubs to meet most requirements• film thickness monitor (FTM) based on a quartz crystal oscillator- usable in two positions (centre/edge)• full range power supply (90-260VAC- 50/60Hz)• coating process head interface (gas and electric) including automatic detection• 5.7“ TFT touch display• recipe-driven user interface for guaranteed reproducible results• storage / view of the last ten coating processes• automatic vent of the system when power failures – prevents backstreaming of oil from the rotary pump• intuitive operator’s software• graphic display of process data with Windows-based software Coating LAB (option)• flange connection (KF25) for connection of an external roughing pump• external alarm connector• USB service interface for easy analysis and software upgrades• automatic valve control for two process gases and venting• operating manual
£0.00Price On Request