Welcome to our new site, if you can’t find what you’re looking for please get in touch via our contact us page.
Two encoded micromanipulators for electron microscopy
Two Encoded Micromanipulators for electron microscopy (NC5.2) – Encoded three-axis micromanipulator system for electron microscopy. The system includes control electronics- iLO control software- tip holders for probe tips- sample probe tips- a vacuum feedthrough and an operator’s handbook.
£0.00
Related products
-
Edwards RV3 rotary vacuum pump (including Ultragrade oil) with 2m UK mains lead
Edwards RV3 Two stage rotary vaccum pump 115/230V- 1-ph- 50/60Hz. Factory set to 230V for Europe• Speed (Pneurop 6602) 50 Hz: 3.3 m3h1 / 2 ft3min1 60Hz: 3.9 m3h1/ 2.3 ft3min1• Ultimate pressure 2.0 x 103mbar / 1.5 x 103 Torr• Inlet flange: NW25 / exhaust flange: NW25• Supplied with: 1 litre of Ultragrade 19 oil-inlet filter and O-ring• EMF10 (A46226000) exhaust oil mist filter recommended • Includes – A50505000UK/Ireland 2m mains lead
Price On Request £0.00 Add to basket
Edwards RV3 rotary vacuum pump (including Ultragrade oil) with 2m UK mains lead
Edwards RV3 Two stage rotary vaccum pump 115/230V- 1-ph- 50/60Hz. Factory set to 230V for Europe• Speed (Pneurop 6602) 50 Hz: 3.3 m3h1 / 2 ft3min1 60Hz: 3.9 m3h1/ 2.3 ft3min1• Ultimate pressure 2.0 x 103mbar / 1.5 x 103 Torr• Inlet flange: NW25 / exhaust flange: NW25• Supplied with: 1 litre of Ultragrade 19 oil-inlet filter and O-ring• EMF10 (A46226000) exhaust oil mist filter recommended • Includes – A50505000UK/Ireland 2m mains lead
£0.00Price On Request -
Encoded micromanipulator for electron microscopy (NC5.2)
Encoded three-axis micromanipulator for electron microscopy (NC5.2). The system includes control electronics, iLO control software, tip holders for probe tips, specimen probe tips, vacuum feedthrough and an operator’s handbook.
Price On Request £0.00 Add to basket
Encoded micromanipulator for electron microscopy (NC5.2)
Encoded three-axis micromanipulator for electron microscopy (NC5.2). The system includes control electronics, iLO control software, tip holders for probe tips, specimen probe tips, vacuum feedthrough and an operator’s handbook.
£0.00Price On Request -
GD-010 glow discharge
Glow discharge attachment for hydrophilic/hydrophobic treatment (rendering) of substrates (e.g. TEM carbon support films). Fully integrated to allow post-treatment of carbon films without the need to break vacuum after carbon coating
Price On Request £0.00 Add to basket
GD-010 glow discharge
Glow discharge attachment for hydrophilic/hydrophobic treatment (rendering) of substrates (e.g. TEM carbon support films). Fully integrated to allow post-treatment of carbon films without the need to break vacuum after carbon coating
£0.00Price On Request -
PS-006 planetary gear table
Consisting of base plate for connection to the tilt and height adjustable specimen table of the CCU-010 base unit. Specimen holders for six large (Ø 25.4mm) or six small (Ø12.7mm) SEM pin stubs. DC micro-motor for rotation and planetary movement, quartz sensor (centre), speed control: 0-100%, rotation: 0-20rpm approximately, planets: 0-65rpm approximately
Price On Request £0.00 Add to basket
PS-006 planetary gear table
Consisting of base plate for connection to the tilt and height adjustable specimen table of the CCU-010 base unit. Specimen holders for six large (Ø 25.4mm) or six small (Ø12.7mm) SEM pin stubs. DC micro-motor for rotation and planetary movement, quartz sensor (centre), speed control: 0-100%, rotation: 0-20rpm approximately, planets: 0-65rpm approximately
£0.00Price On Request