Welcome to our new site, if you can’t find what you’re looking for please get in touch via our contact us page.
SilentLab 3 for small single rotary pump – 230V
SilentLab 3 for small single rotary pump – 230V (each)
£2,202.57
Related products
-
SilentLab 4 for single rotary pump – 230V
SilentLab 4 acustic enclosure for a single rotary pump, 230V (each)Featuring:• Noise reduction approximately 15dB to 12dB• Robust all-metal construction with high performance acoustic foam• Acoustic foam with optimised pattern to reduce low frequency noise• IEC mains connectors with fuse for easy installation • Fans only switched on when the rotary pump is running• Sophisticated air flow system with low noise high capacity fans• Integrated digital thermometer• Top lid for easy service access• Powder-coated oil and water resistant surface in light blue RAL5005• Flammability rating to DIN 75200 / FMVSS 302• Internal KF25 installation kit included
£2,586.80 Add to basket
SilentLab 4 for single rotary pump – 230V
SilentLab 4 acustic enclosure for a single rotary pump, 230V (each)Featuring:• Noise reduction approximately 15dB to 12dB• Robust all-metal construction with high performance acoustic foam• Acoustic foam with optimised pattern to reduce low frequency noise• IEC mains connectors with fuse for easy installation • Fans only switched on when the rotary pump is running• Sophisticated air flow system with low noise high capacity fans• Integrated digital thermometer• Top lid for easy service access• Powder-coated oil and water resistant surface in light blue RAL5005• Flammability rating to DIN 75200 / FMVSS 302• Internal KF25 installation kit included
£2,586.80 -
PS-006 planetary gear table
Consisting of base plate for connection to the tilt and height adjustable specimen table of the CCU-010 base unit. Specimen holders for six large (Ø 25.4mm) or six small (Ø12.7mm) SEM pin stubs. DC micro-motor for rotation and planetary movement, quartz sensor (centre), speed control: 0-100%, rotation: 0-20rpm approximately, planets: 0-65rpm approximately
Price On Request £0.00 Add to basket
PS-006 planetary gear table
Consisting of base plate for connection to the tilt and height adjustable specimen table of the CCU-010 base unit. Specimen holders for six large (Ø 25.4mm) or six small (Ø12.7mm) SEM pin stubs. DC micro-motor for rotation and planetary movement, quartz sensor (centre), speed control: 0-100%, rotation: 0-20rpm approximately, planets: 0-65rpm approximately
£0.00Price On Request -
RC-010 software for remote control of CCU-010
Windows-based RC-010 remote control software allows Safematic CCU-010 coaters to be run remotely for the control, monitoring and analysis of coating processes, for example in a glove box. The RC-010 comes ready with pre-defined recipes with optimal settings for the most common metal sputtering targets as well as for carbon. Requires connection from a laptop or computer (not supplied) to the CCU-010 coating system via a USB cable.
Price On Request £0.00 Add to basket
RC-010 software for remote control of CCU-010
Windows-based RC-010 remote control software allows Safematic CCU-010 coaters to be run remotely for the control, monitoring and analysis of coating processes, for example in a glove box. The RC-010 comes ready with pre-defined recipes with optimal settings for the most common metal sputtering targets as well as for carbon. Requires connection from a laptop or computer (not supplied) to the CCU-010 coating system via a USB cable.
£0.00Price On Request -
Coating LAB software
Coating LAB Windows-based software can be installed on a laptop for monitoring and documenting coating processes. Fully automatic logs and charts containing all process-related data can be exported as screenshots or CSV files for Office applications. Available information includes process vacuum, current and voltage along with film thickness and coating rates (Internet connection required). Coating-LAB will allow remote service access for error diagnosis and process optimisation.
Price On Request £0.00 Add to basket
Coating LAB software
Coating LAB Windows-based software can be installed on a laptop for monitoring and documenting coating processes. Fully automatic logs and charts containing all process-related data can be exported as screenshots or CSV files for Office applications. Available information includes process vacuum, current and voltage along with film thickness and coating rates (Internet connection required). Coating-LAB will allow remote service access for error diagnosis and process optimisation.
£0.00Price On Request