Welcome to our new site, if you can’t find what you’re looking for please get in touch via our contact us page.
S-Clip sample holder with twoS-Clips on a Ø63mm pin stub
EM-Tec S-Clip sample holder with two S-Clips on a Ø63mm pin stub (each)
£30.77
Related products
-
CCU-010 HV (high vacuum)
The Safematic CCU-010 HV vacuum coater is suitable for both SEM and TEM sputter coating and carbon coating applications.
Price On Request £0.00 Add to basket
CCU-010 HV (high vacuum)
The Safematic CCU-010 HV vacuum coater is suitable for both SEM and TEM sputter coating and carbon coating applications.
£0.00Price On Request -
Edwards nXDS6i dry scroll pump
nXDS6i Scroll Pump.Peak pumping speed: 6m3/hr (3.53 cfm).Utimate pressure: 0.02mbar (1.5e-2 torr).Inverter drive with push button control – remote serial and parallel.control and USB interface.Supply: 100-127/200-240V 1ph 50/60Hz without user intervention.Inlet port: NW25. Exhaust port: NW25.
Price On Request £0.00 Add to basket
Edwards nXDS6i dry scroll pump
nXDS6i Scroll Pump.Peak pumping speed: 6m3/hr (3.53 cfm).Utimate pressure: 0.02mbar (1.5e-2 torr).Inverter drive with push button control – remote serial and parallel.control and USB interface.Supply: 100-127/200-240V 1ph 50/60Hz without user intervention.Inlet port: NW25. Exhaust port: NW25.
£0.00Price On Request -
GD-010 glow discharge
Glow discharge attachment for hydrophilic/hydrophobic treatment (rendering) of substrates (e.g. TEM carbon support films). Fully integrated to allow post-treatment of carbon films without the need to break vacuum after carbon coating
Price On Request £0.00 Add to basket
GD-010 glow discharge
Glow discharge attachment for hydrophilic/hydrophobic treatment (rendering) of substrates (e.g. TEM carbon support films). Fully integrated to allow post-treatment of carbon films without the need to break vacuum after carbon coating
£0.00Price On Request -
PS-006 planetary gear table
Consisting of base plate for connection to the tilt and height adjustable specimen table of the CCU-010 base unit. Specimen holders for six large (Ø 25.4mm) or six small (Ø12.7mm) SEM pin stubs. DC micro-motor for rotation and planetary movement, quartz sensor (centre), speed control: 0-100%, rotation: 0-20rpm approximately, planets: 0-65rpm approximately
Price On Request £0.00 Add to basket
PS-006 planetary gear table
Consisting of base plate for connection to the tilt and height adjustable specimen table of the CCU-010 base unit. Specimen holders for six large (Ø 25.4mm) or six small (Ø12.7mm) SEM pin stubs. DC micro-motor for rotation and planetary movement, quartz sensor (centre), speed control: 0-100%, rotation: 0-20rpm approximately, planets: 0-65rpm approximately
£0.00Price On Request