Welcome to our new site, if you can’t find what you’re looking for please get in touch via our contact us page.
Replacement conductive O-rings for the EM-Tec C-Square multi-pin stub holders
Replacement conductive and vacuum compatible gripping O-rings for the EM-Tec C-Square multi-pin stub holders (set/20)
£20.58
Related products
-
EM-Tec B38 bulk sample holder for up 38mm, aluminium – pin
EM-Tec B38 bulk sample holder for up 38mm, aluminium – pin (each)
£53.56 Add to basket
EM-Tec B38 bulk sample holder for up 38mm, aluminium – pin
EM-Tec B38 bulk sample holder for up 38mm, aluminium – pin (each)
£53.56 -
CCU-010 LV (standard vacuum)
Safematic CCU-010 LV compact, fully automatic standard vacuum coating system. Including dual-position terminating film thickness monitoring system. Please note that for a complete working system the CCU-010LV requires the following: backing rotary vacuum pump (A65201903), oil mist filter (A46226000) and pumping hose (C10514297). Select coating head option SP-010 (sputteringing), CT-010 (carbon evaporation) or both. Select required sputtering target(s). Detailed description: • glass work chamber- 104 mm Ø x 106 mm (DN 100 ISO-KF compatible)• implosion guard and safety monitoring• table (Ø 80 mm) – tilt and height adjustable • multi-sample holder for 20 standard (13 mm) pin stubs to meet most requirements• film thickness monitor (FTM) based on a quartz crystal oscillator- usable in two positions (centre/edge)• full range power supply (90-260VAC- 50/60Hz)• coating process head interface (gas and electric) including automatic detection• 5.7“ TFT touch display• recipe-driven user interface for guaranteed reproducible results• storage / view of the last ten coating processes• automatic vent of the system when power failures – prevents backstreaming of oil from the rotary pump• intuitive operator’s software• graphic display of process data with Windows-based software Coating LAB (option)• flange connection (KF25) for connection of an external roughing pump• external alarm connector• USB service interface for easy analysis and software upgrades• automatic valve control for two process gases and venting• operating manual
Price On Request £0.00 Add to basket
CCU-010 LV (standard vacuum)
Safematic CCU-010 LV compact, fully automatic standard vacuum coating system. Including dual-position terminating film thickness monitoring system. Please note that for a complete working system the CCU-010LV requires the following: backing rotary vacuum pump (A65201903), oil mist filter (A46226000) and pumping hose (C10514297). Select coating head option SP-010 (sputteringing), CT-010 (carbon evaporation) or both. Select required sputtering target(s). Detailed description: • glass work chamber- 104 mm Ø x 106 mm (DN 100 ISO-KF compatible)• implosion guard and safety monitoring• table (Ø 80 mm) – tilt and height adjustable • multi-sample holder for 20 standard (13 mm) pin stubs to meet most requirements• film thickness monitor (FTM) based on a quartz crystal oscillator- usable in two positions (centre/edge)• full range power supply (90-260VAC- 50/60Hz)• coating process head interface (gas and electric) including automatic detection• 5.7“ TFT touch display• recipe-driven user interface for guaranteed reproducible results• storage / view of the last ten coating processes• automatic vent of the system when power failures – prevents backstreaming of oil from the rotary pump• intuitive operator’s software• graphic display of process data with Windows-based software Coating LAB (option)• flange connection (KF25) for connection of an external roughing pump• external alarm connector• USB service interface for easy analysis and software upgrades• automatic valve control for two process gases and venting• operating manual
£0.00Price On Request -
SP-011 sputtering module for high sputtering rates
SP-011 sputtering head module for applications where high sputtering rates are required
Price On Request £0.00 Add to basket
SP-011 sputtering module for high sputtering rates
SP-011 sputtering head module for applications where high sputtering rates are required
£0.00Price On Request -
EM-Tec MM48 multi-metallographic mount holder for eight Ø40mm / Ø1-1/2 inch mounts – pin
EM-Tec MM48 multi-metallographic mount holder for 8 x Ø40mm / Ø1-1/2 inch mounts – pin (each)
£430.75 Add to basket
EM-Tec MM48 multi-metallographic mount holder for eight Ø40mm / Ø1-1/2 inch mounts – pin
EM-Tec MM48 multi-metallographic mount holder for 8 x Ø40mm / Ø1-1/2 inch mounts – pin (each)
£430.75