Welcome to our new site, if you can’t find what you’re looking for please get in touch via our contact us page.
Phenom PHF32 filter holder with support block and clamp ring
Phenom PHF32 filter holder kit with support block and clamp ring. For Phenom metallurgical sample holder (each)
£44.56
Related products
-
CCU-010 LV (standard vacuum)
Safematic CCU-010 LV compact, fully automatic standard vacuum coating system. Including dual-position terminating film thickness monitoring system. Please note that for a complete working system the CCU-010LV requires the following: backing rotary vacuum pump (A65201903), oil mist filter (A46226000) and pumping hose (C10514297). Select coating head option SP-010 (sputteringing), CT-010 (carbon evaporation) or both. Select required sputtering target(s). Detailed description: • glass work chamber- 104 mm Ø x 106 mm (DN 100 ISO-KF compatible)• implosion guard and safety monitoring• table (Ø 80 mm) – tilt and height adjustable • multi-sample holder for 20 standard (13 mm) pin stubs to meet most requirements• film thickness monitor (FTM) based on a quartz crystal oscillator- usable in two positions (centre/edge)• full range power supply (90-260VAC- 50/60Hz)• coating process head interface (gas and electric) including automatic detection• 5.7“ TFT touch display• recipe-driven user interface for guaranteed reproducible results• storage / view of the last ten coating processes• automatic vent of the system when power failures – prevents backstreaming of oil from the rotary pump• intuitive operator’s software• graphic display of process data with Windows-based software Coating LAB (option)• flange connection (KF25) for connection of an external roughing pump• external alarm connector• USB service interface for easy analysis and software upgrades• automatic valve control for two process gases and venting• operating manual
Price On Request £0.00 Add to basket
CCU-010 LV (standard vacuum)
Safematic CCU-010 LV compact, fully automatic standard vacuum coating system. Including dual-position terminating film thickness monitoring system. Please note that for a complete working system the CCU-010LV requires the following: backing rotary vacuum pump (A65201903), oil mist filter (A46226000) and pumping hose (C10514297). Select coating head option SP-010 (sputteringing), CT-010 (carbon evaporation) or both. Select required sputtering target(s). Detailed description: • glass work chamber- 104 mm Ø x 106 mm (DN 100 ISO-KF compatible)• implosion guard and safety monitoring• table (Ø 80 mm) – tilt and height adjustable • multi-sample holder for 20 standard (13 mm) pin stubs to meet most requirements• film thickness monitor (FTM) based on a quartz crystal oscillator- usable in two positions (centre/edge)• full range power supply (90-260VAC- 50/60Hz)• coating process head interface (gas and electric) including automatic detection• 5.7“ TFT touch display• recipe-driven user interface for guaranteed reproducible results• storage / view of the last ten coating processes• automatic vent of the system when power failures – prevents backstreaming of oil from the rotary pump• intuitive operator’s software• graphic display of process data with Windows-based software Coating LAB (option)• flange connection (KF25) for connection of an external roughing pump• external alarm connector• USB service interface for easy analysis and software upgrades• automatic valve control for two process gases and venting• operating manual
£0.00Price On Request -
PH22 bulk holder for Phenom metallurgical sample holder
Phenom PH22 bulk holder up to Ø22 x 12mm, for Phenom metallurgical sample holder (each)
£58.06 Add to basket
PH22 bulk holder for Phenom metallurgical sample holder
Phenom PH22 bulk holder up to Ø22 x 12mm, for Phenom metallurgical sample holder (each)
£58.06 -
EM-Tec P19S replacement pins Ø1.6 x 19mm – stainless steel AISI 316
EM-Tec P19S replacement pins Ø1.6 x 19mm- stainless steel AISI 316 (pkg/10)
£10.29 Add to basket
EM-Tec P19S replacement pins Ø1.6 x 19mm – stainless steel AISI 316
EM-Tec P19S replacement pins Ø1.6 x 19mm- stainless steel AISI 316 (pkg/10)
£10.29 -
EBSD-3D sample holder for FEI / Thermo Dualbeam systems, aluminium – M6 fine thread
EBSD-3D sample holder for FEI / Thermo Dualbeam Systems- aluminium- M6 fine thread (Pkg/10)
£436.60 Add to basket
EBSD-3D sample holder for FEI / Thermo Dualbeam systems, aluminium – M6 fine thread
EBSD-3D sample holder for FEI / Thermo Dualbeam Systems- aluminium- M6 fine thread (Pkg/10)
£436.60