Welcome to our new site, if you can’t find what you’re looking for please get in touch via our contact us page.
Nichrome 80 evaporation/heating wire – 80/20 wt% Ni/Cr- 0.25mm diameter x 20 metre L- 99.5% purity
Nichrome 80 evaporation/heating wire, 80/20 wt% Ni/Cr- 0.25mm diameter x 20m L- 99.5% purity (20m)
£9.09
Related products
-
Indium Tin Oxide target (ITO), Ø54 x 2mm (90/10- 99.99%)
Indium tin oxide (ITO) sputter coater target – 90/10 Ø 54 x 2mm, high purity 99.99%
SKU: 300012Price On Request £0.00 Add to basketAdd to QuoteWithin your QuoteAdd to QuoteIndium Tin Oxide target (ITO), Ø54 x 2mm (90/10- 99.99%)
Indium tin oxide (ITO) sputter coater target – 90/10 Ø 54 x 2mm, high purity 99.99%
£0.00Price On Request -
Edwards nXDS10i dry scroll pump
Edwards nXDS10i dry scroll pump.Peak pumping speed 11.4 m3/hr (6.7 cfm). Ultimate pressure 0.007 mbar (0.005 torr).Pump controller with push button control- remote serial and parallel control plus USB service interface.Supply 100-127/200-240V (+/- 10%) 1ph 50/60Hz without user intervention.Inlet port : NW25- exhaust port : NW25
SKU: A73601983Price On Request £0.00 Add to basketAdd to QuoteWithin your QuoteAdd to QuoteEdwards nXDS10i dry scroll pump
Edwards nXDS10i dry scroll pump.Peak pumping speed 11.4 m3/hr (6.7 cfm). Ultimate pressure 0.007 mbar (0.005 torr).Pump controller with push button control- remote serial and parallel control plus USB service interface.Supply 100-127/200-240V (+/- 10%) 1ph 50/60Hz without user intervention.Inlet port : NW25- exhaust port : NW25
£0.00Price On Request -
EMF10 mist filter
Edwards EMF10 oil mist filter suitable for use with an RV3 pump. Supplied with NW25 clamp, centering ring and O- ring- NW25 to 3/4 inch BSP adaptor.
SKU: A46226000£271.60 Add to basketAdd to QuoteWithin your QuoteAdd to QuoteEMF10 mist filter
Edwards EMF10 oil mist filter suitable for use with an RV3 pump. Supplied with NW25 clamp, centering ring and O- ring- NW25 to 3/4 inch BSP adaptor.
£271.60 -
GD-010 glow discharge
Glow discharge attachment for hydrophilic/hydrophobic treatment (rendering) of substrates (e.g. TEM carbon support films). Fully integrated to allow post-treatment of carbon films without the need to break vacuum after carbon coating
SKU: 100004Price On Request £0.00 Add to basketAdd to QuoteWithin your QuoteAdd to QuoteGD-010 glow discharge
Glow discharge attachment for hydrophilic/hydrophobic treatment (rendering) of substrates (e.g. TEM carbon support films). Fully integrated to allow post-treatment of carbon films without the need to break vacuum after carbon coating
£0.00Price On Request