Welcome to our new site, if you can’t find what you’re looking for please get in touch via our contact us page.
Multi-stub holder for three Ø12.2mm JEOL cylinder stubs
EM-Tec J3 multi-stub holder for threeØ12.2mm JEOL stubs, Ø31.5 x 10mm – cylinder (each)
£32.86
Related products
-
EMF10 mist filter
Edwards EMF10 oil mist filter suitable for use with an RV3 pump. Supplied with NW25 clamp, centering ring and O- ring- NW25 to 3/4 inch BSP adaptor.
£271.60 Add to basket
EMF10 mist filter
Edwards EMF10 oil mist filter suitable for use with an RV3 pump. Supplied with NW25 clamp, centering ring and O- ring- NW25 to 3/4 inch BSP adaptor.
£271.60 -
CCU-010 LV (standard vacuum)
Safematic CCU-010 LV compact, fully automatic standard vacuum coating system. Including dual-position terminating film thickness monitoring system. Please note that for a complete working system the CCU-010LV requires the following: backing rotary vacuum pump (A65201903), oil mist filter (A46226000) and pumping hose (C10514297). Select coating head option SP-010 (sputteringing), CT-010 (carbon evaporation) or both. Select required sputtering target(s). Detailed description: • glass work chamber- 104 mm Ø x 106 mm (DN 100 ISO-KF compatible)• implosion guard and safety monitoring• table (Ø 80 mm) – tilt and height adjustable • multi-sample holder for 20 standard (13 mm) pin stubs to meet most requirements• film thickness monitor (FTM) based on a quartz crystal oscillator- usable in two positions (centre/edge)• full range power supply (90-260VAC- 50/60Hz)• coating process head interface (gas and electric) including automatic detection• 5.7“ TFT touch display• recipe-driven user interface for guaranteed reproducible results• storage / view of the last ten coating processes• automatic vent of the system when power failures – prevents backstreaming of oil from the rotary pump• intuitive operator’s software• graphic display of process data with Windows-based software Coating LAB (option)• flange connection (KF25) for connection of an external roughing pump• external alarm connector• USB service interface for easy analysis and software upgrades• automatic valve control for two process gases and venting• operating manual
Price On Request £0.00 Add to basket
CCU-010 LV (standard vacuum)
Safematic CCU-010 LV compact, fully automatic standard vacuum coating system. Including dual-position terminating film thickness monitoring system. Please note that for a complete working system the CCU-010LV requires the following: backing rotary vacuum pump (A65201903), oil mist filter (A46226000) and pumping hose (C10514297). Select coating head option SP-010 (sputteringing), CT-010 (carbon evaporation) or both. Select required sputtering target(s). Detailed description: • glass work chamber- 104 mm Ø x 106 mm (DN 100 ISO-KF compatible)• implosion guard and safety monitoring• table (Ø 80 mm) – tilt and height adjustable • multi-sample holder for 20 standard (13 mm) pin stubs to meet most requirements• film thickness monitor (FTM) based on a quartz crystal oscillator- usable in two positions (centre/edge)• full range power supply (90-260VAC- 50/60Hz)• coating process head interface (gas and electric) including automatic detection• 5.7“ TFT touch display• recipe-driven user interface for guaranteed reproducible results• storage / view of the last ten coating processes• automatic vent of the system when power failures – prevents backstreaming of oil from the rotary pump• intuitive operator’s software• graphic display of process data with Windows-based software Coating LAB (option)• flange connection (KF25) for connection of an external roughing pump• external alarm connector• USB service interface for easy analysis and software upgrades• automatic valve control for two process gases and venting• operating manual
£0.00Price On Request -
HS-010 head module storage box
HS-010 head storage box for maintaining sputtering or carbon modules under vacuum when not in use.
Price On Request £0.00 Add to basket
HS-010 head module storage box
HS-010 head storage box for maintaining sputtering or carbon modules under vacuum when not in use.
£0.00Price On Request -
Edwards nXDS6i dry scroll pump
nXDS6i Scroll Pump.Peak pumping speed: 6m3/hr (3.53 cfm).Utimate pressure: 0.02mbar (1.5e-2 torr).Inverter drive with push button control – remote serial and parallel.control and USB interface.Supply: 100-127/200-240V 1ph 50/60Hz without user intervention.Inlet port: NW25. Exhaust port: NW25.
Price On Request £0.00 Add to basket
Edwards nXDS6i dry scroll pump
nXDS6i Scroll Pump.Peak pumping speed: 6m3/hr (3.53 cfm).Utimate pressure: 0.02mbar (1.5e-2 torr).Inverter drive with push button control – remote serial and parallel.control and USB interface.Supply: 100-127/200-240V 1ph 50/60Hz without user intervention.Inlet port: NW25. Exhaust port: NW25.
£0.00Price On Request