Welcome to our new site, if you can’t find what you’re looking for please get in touch via our contact us page.
J6 multi-stub holder for 6 x Ø12.2mm JEOL stubs – pin
EM-Tec J6 multi-stub holder for 6 x Ø12.2mm JEOL stubs- Ø50.0x10mm- pin (each)
£97.67
Related products
-
ST-010 object slide table
ST-010 specimen stage for microscopy slides. Comprises base plate connected to the tilt and height adjustable specimen table of the CCU-010 base unit. For two microscopy slides 76 x 26mm or one slide 76 x 52mm. Can also be used for coverslips. Twelve M2 threaded holes for S-clips. Two FTM quartz crystal positions (centre and edge). Six mounting clips M2 included.
Price On Request £0.00 Add to basket
ST-010 object slide table
ST-010 specimen stage for microscopy slides. Comprises base plate connected to the tilt and height adjustable specimen table of the CCU-010 base unit. For two microscopy slides 76 x 26mm or one slide 76 x 52mm. Can also be used for coverslips. Twelve M2 threaded holes for S-clips. Two FTM quartz crystal positions (centre and edge). Six mounting clips M2 included.
£0.00Price On Request -
EMF10 mist filter
Edwards EMF10 oil mist filter suitable for use with an RV3 pump. Supplied with NW25 clamp, centering ring and O- ring- NW25 to 3/4 inch BSP adaptor.
£271.60 Add to basket
EMF10 mist filter
Edwards EMF10 oil mist filter suitable for use with an RV3 pump. Supplied with NW25 clamp, centering ring and O- ring- NW25 to 3/4 inch BSP adaptor.
£271.60 -
Carbon fibre thread on coil – 2m
High purity carbon fibre thread on coil, 2 metre.
Price On Request £0.00 Add to basket
Carbon fibre thread on coil – 2m
High purity carbon fibre thread on coil, 2 metre.
£0.00Price On Request -
RC-010 software for remote control of CCU-010
Windows-based RC-010 remote control software allows Safematic CCU-010 coaters to be run remotely for the control, monitoring and analysis of coating processes, for example in a glove box. The RC-010 comes ready with pre-defined recipes with optimal settings for the most common metal sputtering targets as well as for carbon. Requires connection from a laptop or computer (not supplied) to the CCU-010 coating system via a USB cable.
Price On Request £0.00 Add to basket
RC-010 software for remote control of CCU-010
Windows-based RC-010 remote control software allows Safematic CCU-010 coaters to be run remotely for the control, monitoring and analysis of coating processes, for example in a glove box. The RC-010 comes ready with pre-defined recipes with optimal settings for the most common metal sputtering targets as well as for carbon. Requires connection from a laptop or computer (not supplied) to the CCU-010 coating system via a USB cable.
£0.00Price On Request