Welcome to our new site, if you can’t find what you’re looking for please get in touch via our contact us page.
HPM Live – Automated High Pressure Freezer
HPM Live is an automated high pressure machine for vitrification in 1.26 second, with remote control and online diagnostic (if connected to internet)• Automatic transfer in 1-26 second• Start-up cycle fully controlled by HPM Live• 20 minute preparation cycle• Each user has his own preset parameters• 15” inch HD colour touchscreen • Data and curves are automatically saved andsent by e-mail• Vitrification of two successive samples in 45 seconds• Optimised for CryoCapsules®• Open system – flexible to use: also compatible with the various sample carriers (carriers of 3, 4 or 6mm tubes etc. existing in the market• The only existing commercial solution for live CLEM (Correlative Light and Electron Microscopy)• Live samples imaging up to 10 minutes• 1 clamp 3mm diameter• 1 clamp for CryoCapsules®• 1 kit of spare parts (03 heated collars, thermocouple sensor, 10 seals)• Station for unloading sample
£0.00
Related products
-
CCU-010 LV (standard vacuum)
Safematic CCU-010 LV compact, fully automatic standard vacuum coating system. Including dual-position terminating film thickness monitoring system. Please note that for a complete working system the CCU-010LV requires the following: backing rotary vacuum pump (A65201903), oil mist filter (A46226000) and pumping hose (C10514297). Select coating head option SP-010 (sputteringing), CT-010 (carbon evaporation) or both. Select required sputtering target(s). Detailed description: • glass work chamber- 104 mm Ø x 106 mm (DN 100 ISO-KF compatible)• implosion guard and safety monitoring• table (Ø 80 mm) – tilt and height adjustable • multi-sample holder for 20 standard (13 mm) pin stubs to meet most requirements• film thickness monitor (FTM) based on a quartz crystal oscillator- usable in two positions (centre/edge)• full range power supply (90-260VAC- 50/60Hz)• coating process head interface (gas and electric) including automatic detection• 5.7“ TFT touch display• recipe-driven user interface for guaranteed reproducible results• storage / view of the last ten coating processes• automatic vent of the system when power failures – prevents backstreaming of oil from the rotary pump• intuitive operator’s software• graphic display of process data with Windows-based software Coating LAB (option)• flange connection (KF25) for connection of an external roughing pump• external alarm connector• USB service interface for easy analysis and software upgrades• automatic valve control for two process gases and venting• operating manual
Price On Request £0.00 Add to basket
CCU-010 LV (standard vacuum)
Safematic CCU-010 LV compact, fully automatic standard vacuum coating system. Including dual-position terminating film thickness monitoring system. Please note that for a complete working system the CCU-010LV requires the following: backing rotary vacuum pump (A65201903), oil mist filter (A46226000) and pumping hose (C10514297). Select coating head option SP-010 (sputteringing), CT-010 (carbon evaporation) or both. Select required sputtering target(s). Detailed description: • glass work chamber- 104 mm Ø x 106 mm (DN 100 ISO-KF compatible)• implosion guard and safety monitoring• table (Ø 80 mm) – tilt and height adjustable • multi-sample holder for 20 standard (13 mm) pin stubs to meet most requirements• film thickness monitor (FTM) based on a quartz crystal oscillator- usable in two positions (centre/edge)• full range power supply (90-260VAC- 50/60Hz)• coating process head interface (gas and electric) including automatic detection• 5.7“ TFT touch display• recipe-driven user interface for guaranteed reproducible results• storage / view of the last ten coating processes• automatic vent of the system when power failures – prevents backstreaming of oil from the rotary pump• intuitive operator’s software• graphic display of process data with Windows-based software Coating LAB (option)• flange connection (KF25) for connection of an external roughing pump• external alarm connector• USB service interface for easy analysis and software upgrades• automatic valve control for two process gases and venting• operating manual
£0.00Price On Request -
ET-010 integrated plasma stage
Plasma cleaning accessory for the pre-treatment (cleaning) or after-treatment (glow discharge effect) of specimens in combination with a coating process.
Price On Request £0.00 Add to basket
ET-010 integrated plasma stage
Plasma cleaning accessory for the pre-treatment (cleaning) or after-treatment (glow discharge effect) of specimens in combination with a coating process.
£0.00Price On Request -
Rotary support for PS-006
Rotary support for use with the PS-006 planetary gear stage. Includes slip-on specimen holder which converts the planetary gear stage into a rotary stage. Twelve M2 threads for mounting specimens or for the using S-clips. Six mounting clips M2 included.
Price On Request £0.00 Add to basket
Rotary support for PS-006
Rotary support for use with the PS-006 planetary gear stage. Includes slip-on specimen holder which converts the planetary gear stage into a rotary stage. Twelve M2 threads for mounting specimens or for the using S-clips. Six mounting clips M2 included.
£0.00Price On Request -
High vacuum (HV) upgrade kit I
Upgrade kit for converting CCU-010 LV to high vacuum CCU-010 HV specification. Includes turbomolecular pump (Pfeiffer Hi Pace 80), conversion kit, cable and other small components. Note: the rotary vacuum pump used with the LV version will be required to “back” the internally mounted turbomolecular pump.
Price On Request £0.00 Add to basket
High vacuum (HV) upgrade kit I
Upgrade kit for converting CCU-010 LV to high vacuum CCU-010 HV specification. Includes turbomolecular pump (Pfeiffer Hi Pace 80), conversion kit, cable and other small components. Note: the rotary vacuum pump used with the LV version will be required to “back” the internally mounted turbomolecular pump.
£0.00Price On Request