Welcome to our new site, if you can’t find what you’re looking for please get in touch via our contact us page.
Four encoded micromanipulators for electron microscopy
Four Encoded Micromanipulators for electron microscopy – Encoded three-axis micromanipulator system for electron microscopy. The system includes control electronics- iLO control software- tip holders for probe tips- sample probe tips- a vacuum feedthrough and an operator’s handbook.
£0.00
Related products
-
High vacuum (HV) upgrade kit I
Upgrade kit for converting CCU-010 LV to high vacuum CCU-010 HV specification. Includes turbomolecular pump (Pfeiffer Hi Pace 80), conversion kit, cable and other small components. Note: the rotary vacuum pump used with the LV version will be required to “back” the internally mounted turbomolecular pump.
SKU: 200000Price On Request £0.00 Add to basketAdd to QuoteWithin your QuoteAdd to QuoteHigh vacuum (HV) upgrade kit I
Upgrade kit for converting CCU-010 LV to high vacuum CCU-010 HV specification. Includes turbomolecular pump (Pfeiffer Hi Pace 80), conversion kit, cable and other small components. Note: the rotary vacuum pump used with the LV version will be required to “back” the internally mounted turbomolecular pump.
£0.00Price On Request -
Edwards RV3 rotary vacuum pump (including Ultragrade oil) with 2m UK mains lead
Edwards RV3 Two stage rotary vaccum pump 115/230V- 1-ph- 50/60Hz. Factory set to 230V for Europe• Speed (Pneurop 6602) 50 Hz: 3.3 m3h1 / 2 ft3min1 60Hz: 3.9 m3h1/ 2.3 ft3min1• Ultimate pressure 2.0 x 103mbar / 1.5 x 103 Torr• Inlet flange: NW25 / exhaust flange: NW25• Supplied with: 1 litre of Ultragrade 19 oil-inlet filter and O-ring• EMF10 (A46226000) exhaust oil mist filter recommended • Includes – A50505000UK/Ireland 2m mains lead
SKU: A65201903Price On Request £0.00 Add to basketAdd to QuoteWithin your QuoteAdd to QuoteEdwards RV3 rotary vacuum pump (including Ultragrade oil) with 2m UK mains lead
Edwards RV3 Two stage rotary vaccum pump 115/230V- 1-ph- 50/60Hz. Factory set to 230V for Europe• Speed (Pneurop 6602) 50 Hz: 3.3 m3h1 / 2 ft3min1 60Hz: 3.9 m3h1/ 2.3 ft3min1• Ultimate pressure 2.0 x 103mbar / 1.5 x 103 Torr• Inlet flange: NW25 / exhaust flange: NW25• Supplied with: 1 litre of Ultragrade 19 oil-inlet filter and O-ring• EMF10 (A46226000) exhaust oil mist filter recommended • Includes – A50505000UK/Ireland 2m mains lead
£0.00Price On Request -
Four encoded micromanipulator with RoTip2 for electron microscopy
Four Encoded Micromanipulator with RoTip2 for electron microscopy (NC5.2) – Encoded four-axis micromanipulator system for electron microscopy. The system includes control electronics- a joypad- iLO control software- tip holders for probe tips- sample probe tips- a vacuum feedthrough and an operator’s handbook.
SKU: MM-MM3E-EM4-001Price On Request £0.00 Add to basketAdd to QuoteWithin your QuoteAdd to QuoteFour encoded micromanipulator with RoTip2 for electron microscopy
Four Encoded Micromanipulator with RoTip2 for electron microscopy (NC5.2) – Encoded four-axis micromanipulator system for electron microscopy. The system includes control electronics- a joypad- iLO control software- tip holders for probe tips- sample probe tips- a vacuum feedthrough and an operator’s handbook.
£0.00Price On Request -
Encoded micromanipulator for electron microscopy (NC5.2)
Encoded three-axis micromanipulator for electron microscopy (NC5.2). The system includes control electronics, iLO control software, tip holders for probe tips, specimen probe tips, vacuum feedthrough and an operator’s handbook.
SKU: MM-MM3E-EM1-000Price On Request £0.00 Add to basketAdd to QuoteWithin your QuoteAdd to QuoteEncoded micromanipulator for electron microscopy (NC5.2)
Encoded three-axis micromanipulator for electron microscopy (NC5.2). The system includes control electronics, iLO control software, tip holders for probe tips, specimen probe tips, vacuum feedthrough and an operator’s handbook.
£0.00Price On Request