Welcome to our new site, if you can’t find what you’re looking for please get in touch via our contact us page.
EM-Tec P38 fixed 38°pre-tilt holder for FEI FIB systems
EM-Tec P38 fixed 38°pre-tilt holder for FEI FIB systems, Ø12.7x17mm – pin (each)
£35.56
Related products
-
GD-010 glow discharge
Glow discharge attachment for hydrophilic/hydrophobic treatment (rendering) of substrates (e.g. TEM carbon support films). Fully integrated to allow post-treatment of carbon films without the need to break vacuum after carbon coating
Price On Request £0.00 Add to basket
GD-010 glow discharge
Glow discharge attachment for hydrophilic/hydrophobic treatment (rendering) of substrates (e.g. TEM carbon support films). Fully integrated to allow post-treatment of carbon films without the need to break vacuum after carbon coating
£0.00Price On Request -
Edwards nXDS6i dry scroll pump
nXDS6i Scroll Pump.Peak pumping speed: 6m3/hr (3.53 cfm).Utimate pressure: 0.02mbar (1.5e-2 torr).Inverter drive with push button control – remote serial and parallel.control and USB interface.Supply: 100-127/200-240V 1ph 50/60Hz without user intervention.Inlet port: NW25. Exhaust port: NW25.
Price On Request £0.00 Add to basket
Edwards nXDS6i dry scroll pump
nXDS6i Scroll Pump.Peak pumping speed: 6m3/hr (3.53 cfm).Utimate pressure: 0.02mbar (1.5e-2 torr).Inverter drive with push button control – remote serial and parallel.control and USB interface.Supply: 100-127/200-240V 1ph 50/60Hz without user intervention.Inlet port: NW25. Exhaust port: NW25.
£0.00Price On Request -
ST-010 object slide table
ST-010 specimen stage for microscopy slides. Comprises base plate connected to the tilt and height adjustable specimen table of the CCU-010 base unit. For two microscopy slides 76 x 26mm or one slide 76 x 52mm. Can also be used for coverslips. Twelve M2 threaded holes for S-clips. Two FTM quartz crystal positions (centre and edge). Six mounting clips M2 included.
Price On Request £0.00 Add to basket
ST-010 object slide table
ST-010 specimen stage for microscopy slides. Comprises base plate connected to the tilt and height adjustable specimen table of the CCU-010 base unit. For two microscopy slides 76 x 26mm or one slide 76 x 52mm. Can also be used for coverslips. Twelve M2 threaded holes for S-clips. Two FTM quartz crystal positions (centre and edge). Six mounting clips M2 included.
£0.00Price On Request -
SP-011 sputtering module for high sputtering rates
SP-011 sputtering head module for applications where high sputtering rates are required
Price On Request £0.00 Add to basket
SP-011 sputtering module for high sputtering rates
SP-011 sputtering head module for applications where high sputtering rates are required
£0.00Price On Request