Welcome to our new site, if you can’t find what you’re looking for please get in touch via our contact us page.
Certified calibration standard- 2.5mm-1µm on Hitachi stub
EM-Tec MCS-1CF certified calibration standard, 2.5mm to 1µm – mounted on 15mm Hitachi stub (each)
£622.43
Related products
-
GD-010 glow discharge
Glow discharge attachment for hydrophilic/hydrophobic treatment (rendering) of substrates (e.g. TEM carbon support films). Fully integrated to allow post-treatment of carbon films without the need to break vacuum after carbon coating
Price On Request £0.00 Add to basket
GD-010 glow discharge
Glow discharge attachment for hydrophilic/hydrophobic treatment (rendering) of substrates (e.g. TEM carbon support films). Fully integrated to allow post-treatment of carbon films without the need to break vacuum after carbon coating
£0.00Price On Request -
Certified calibration standard, 2.5mm to 1µm on a JEOL stub
EM-Tec MCS-1CF certified calibration standard, 2.5mm to 1µm – mounted on 12.2mm JEOL stub (each)
£637.86 Add to basket
Certified calibration standard, 2.5mm to 1µm on a JEOL stub
EM-Tec MCS-1CF certified calibration standard, 2.5mm to 1µm – mounted on 12.2mm JEOL stub (each)
£637.86 -
Edwards RV3 rotary vacuum pump (including Ultragrade oil) with 2m UK mains lead
Edwards RV3 Two stage rotary vaccum pump 115/230V- 1-ph- 50/60Hz. Factory set to 230V for Europe• Speed (Pneurop 6602) 50 Hz: 3.3 m3h1 / 2 ft3min1 60Hz: 3.9 m3h1/ 2.3 ft3min1• Ultimate pressure 2.0 x 103mbar / 1.5 x 103 Torr• Inlet flange: NW25 / exhaust flange: NW25• Supplied with: 1 litre of Ultragrade 19 oil-inlet filter and O-ring• EMF10 (A46226000) exhaust oil mist filter recommended • Includes – A50505000UK/Ireland 2m mains lead
Price On Request £0.00 Add to basket
Edwards RV3 rotary vacuum pump (including Ultragrade oil) with 2m UK mains lead
Edwards RV3 Two stage rotary vaccum pump 115/230V- 1-ph- 50/60Hz. Factory set to 230V for Europe• Speed (Pneurop 6602) 50 Hz: 3.3 m3h1 / 2 ft3min1 60Hz: 3.9 m3h1/ 2.3 ft3min1• Ultimate pressure 2.0 x 103mbar / 1.5 x 103 Torr• Inlet flange: NW25 / exhaust flange: NW25• Supplied with: 1 litre of Ultragrade 19 oil-inlet filter and O-ring• EMF10 (A46226000) exhaust oil mist filter recommended • Includes – A50505000UK/Ireland 2m mains lead
£0.00Price On Request -
Certified calibration standard, 2.5mm to 1µm on a 12.7mm pin
EM-Tec MCS-1CF certified calibration standard, 2.5mm to 1µm – mounted on Zeiss 12.7mm pin stub (each)
£622.43 Add to basket
Certified calibration standard, 2.5mm to 1µm on a 12.7mm pin
EM-Tec MCS-1CF certified calibration standard, 2.5mm to 1µm – mounted on Zeiss 12.7mm pin stub (each)
£622.43