EM Products
Filter By
Showing 496–510 of 2914 results
-
CR1000 cryosectioning system for MT990
CR1000 : Cryosectioning system for MT990 Rotary MicrotomeThe CR1000 paired with the MT990 is exclusive to RMC Boeckeler with no other product of its kind on the market today. Ideal tool for cryosectioning polymers- rubbers- and films for optical and FTIR transmission microscopy- as well as cryo-planing sample surfaces for AFM and SEM. (refer to data sheet for more information)
Price On Request £0.00 Add to basket
CR1000 cryosectioning system for MT990
CR1000 : Cryosectioning system for MT990 Rotary MicrotomeThe CR1000 paired with the MT990 is exclusive to RMC Boeckeler with no other product of its kind on the market today. Ideal tool for cryosectioning polymers- rubbers- and films for optical and FTIR transmission microscopy- as well as cryo-planing sample surfaces for AFM and SEM. (refer to data sheet for more information)
£0.00Price On Request -
Cryo grid box handling tweezers 145mm – anti-magnetic
EM-Tec 553.AM cryo grid box handling tweezers, 145mm- anti-magnetic stainless steel (each)
£18.24 Add to basket
Cryo grid box handling tweezers 145mm – anti-magnetic
EM-Tec 553.AM cryo grid box handling tweezers, 145mm- anti-magnetic stainless steel (each)
£18.24 -
Cryo low current measurement kit
Cryo Low-Current measurement Kit – A plug-in tool for the MM3A-EM to allow low-current- low-capacity measurements on conductive samples in a cryo environment. Each kit consists of a probe tip holder- vacuum and air-side triax cabling and a vacuum feedthrough. A vacuum flange and an operator’s handbook is also included with each delivery. One kit required per MM3A.
Price On Request £0.00 Add to basket
Cryo low current measurement kit
Cryo Low-Current measurement Kit – A plug-in tool for the MM3A-EM to allow low-current- low-capacity measurements on conductive samples in a cryo environment. Each kit consists of a probe tip holder- vacuum and air-side triax cabling and a vacuum feedthrough. A vacuum flange and an operator’s handbook is also included with each delivery. One kit required per MM3A.
£0.00Price On Request -
CryoCapsule ©
This exclusive tool is specially developed for Live imaging before freezing.
Price On Request £0.00 Add to basket
CryoCapsule ©
This exclusive tool is specially developed for Live imaging before freezing.
£0.00Price On Request -
Cryosectioning kit
Cryosectioning Kit Includes: – Pick Up Loop – Embedding Loop – Eyelash Probe- Specimen Pin Stand – Parafilm – Forceps (3 sets)- Microscapel- Custom glass slides – Specimen pins (qty.30)
Price On Request £0.00 Add to basket
Cryosectioning kit
Cryosectioning Kit Includes: – Pick Up Loop – Embedding Loop – Eyelash Probe- Specimen Pin Stand – Parafilm – Forceps (3 sets)- Microscapel- Custom glass slides – Specimen pins (qty.30)
£0.00Price On Request -
CS-20NG AFM XYZ calibration standard 20nm Z – unmounted
CS-20NG AFM XYZ calibration standard, 20nm Z – unmounted (each)
£679.22 Add to basket
CS-20NG AFM XYZ calibration standard 20nm Z – unmounted
CS-20NG AFM XYZ calibration standard, 20nm Z – unmounted (each)
£679.22 -
CT-010 carbon coating module
Carbon fibre thread evaporation module with unique thread tracking system, allowing up to 50 coatings without having to break vacuum and replenish the carbon source. Controlled, automatic pulse evaporation modes give optimal coating control and film quality. Easy-fit electrical and pneumatic interface to CCU-010 LV and CCU-010 HV platforms. Includes one 300015 carbon thread on coil 2m.
Price On Request £0.00 Add to basket
CT-010 carbon coating module
Carbon fibre thread evaporation module with unique thread tracking system, allowing up to 50 coatings without having to break vacuum and replenish the carbon source. Controlled, automatic pulse evaporation modes give optimal coating control and film quality. Easy-fit electrical and pneumatic interface to CCU-010 LV and CCU-010 HV platforms. Includes one 300015 carbon thread on coil 2m.
£0.00Price On Request -
Cube corner diamond tip
Cube corner Ddamond tip. A cube corner diamond tip (conductive diamond) mounted to a holder for the MM3A-EM.
Price On Request £0.00 Add to basket
Cube corner diamond tip
Cube corner Ddamond tip. A cube corner diamond tip (conductive diamond) mounted to a holder for the MM3A-EM.
£0.00Price On Request -
Current imaging module
Current imaging module. A system for measuring and mapping current flow to a biased tip that is scanned over the specimen surface.
Price On Request £0.00 Add to basket
Current imaging module
Current imaging module. A system for measuring and mapping current flow to a biased tip that is scanned over the specimen surface.
£0.00Price On Request -
D12 double-sided adhesive tabs, Ø12mm – non-conductive
Micro-Tec D12 double-sided adhesive tabs, Ø12mm – non-conductive (pkg/100)
£3.89 Add to basket
D12 double-sided adhesive tabs, Ø12mm – non-conductive
Micro-Tec D12 double-sided adhesive tabs, Ø12mm – non-conductive (pkg/100)
£3.89 -
DB2 fine tip air blower/hand duster with non-return valve
Value-Tec DB2 fine tip air blower/hand duster with non-return valve – 120 x Ø60 mm (each)
£8.55 Add to basket
DB2 fine tip air blower/hand duster with non-return valve
Value-Tec DB2 fine tip air blower/hand duster with non-return valve – 120 x Ø60 mm (each)
£8.55 -
Diamond knife and glass knife holder
Diamond knife and glass knife holder
Price On Request £0.00 Add to basket
-
Diamond knife holder
Diamond knife holder
Price On Request £0.00 Add to basket
-
DiATOME ultra maxi 35° diamond knife
DiATOME ultra maxi 35° diamond knife for ATUMtome
Price On Request £0.00 Select options This product has multiple variants. The options may be chosen on the product page
DiATOME ultra maxi 35° diamond knife
DiATOME ultra maxi 35° diamond knife for ATUMtome
£0.00Price On Request -
DiATOME ultra maxi 35°- 3.0mm resharpening
DiATOME ultra maxi 35°- 3.0mm diamond knife resharpening
Price On Request Read more
DiATOME ultra maxi 35°- 3.0mm resharpening
DiATOME ultra maxi 35°- 3.0mm diamond knife resharpening
Price On Request