EM Products
Filter By
Showing 1261–1275 of 2914 results
-
HOPG- 3.5° mosaic spread, double-sided – 10 x 10 x 1mm chip
ZYH grade HOPG- 3.5° mosaic spread, double-sided – 10 x 10 x 1mm chip (each)
£90.93 Add to basket
HOPG- 3.5° mosaic spread, double-sided – 10 x 10 x 1mm chip
ZYH grade HOPG- 3.5° mosaic spread, double-sided – 10 x 10 x 1mm chip (each)
£90.93 -
HOPG- 3.5° mosaic spread, double-sided – 10 x 10 x 2mm chip
ZYH grade HOPG- 3.5° mosaic spread, double-sided – 10 x 10 x 2mm chip (each)
£120.51 Add to basket
HOPG- 3.5° mosaic spread, double-sided – 10 x 10 x 2mm chip
ZYH grade HOPG- 3.5° mosaic spread, double-sided – 10 x 10 x 2mm chip (each)
£120.51 -
HOPG- 3.5° mosaic spread, double-sided – 10 x 10 x 2mm chip
ZYH grade HOPG- 3.5° mosaic spread, double-sided – 10 x10 x 2mm chip (pkg/5)
£485.09 Add to basket
HOPG- 3.5° mosaic spread, double-sided – 10 x 10 x 2mm chip
ZYH grade HOPG- 3.5° mosaic spread, double-sided – 10 x10 x 2mm chip (pkg/5)
£485.09 -
HPM Live – Automated High Pressure Freezer
HPM Live is an automated high pressure machine for vitrification in 1.26 second, with remote control and online diagnostic (if connected to internet)• Automatic transfer in 1-26 second• Start-up cycle fully controlled by HPM Live• 20 minute preparation cycle• Each user has his own preset parameters• 15” inch HD colour touchscreen • Data and curves are automatically saved andsent by e-mail• Vitrification of two successive samples in 45 seconds• Optimised for CryoCapsules®• Open system – flexible to use: also compatible with the various sample carriers (carriers of 3, 4 or 6mm tubes etc. existing in the market• The only existing commercial solution for live CLEM (Correlative Light and Electron Microscopy)• Live samples imaging up to 10 minutes• 1 clamp 3mm diameter• 1 clamp for CryoCapsules®• 1 kit of spare parts (03 heated collars, thermocouple sensor, 10 seals)• Station for unloading sample
Price On Request £0.00 Add to basket
HPM Live – Automated High Pressure Freezer
HPM Live is an automated high pressure machine for vitrification in 1.26 second, with remote control and online diagnostic (if connected to internet)• Automatic transfer in 1-26 second• Start-up cycle fully controlled by HPM Live• 20 minute preparation cycle• Each user has his own preset parameters• 15” inch HD colour touchscreen • Data and curves are automatically saved andsent by e-mail• Vitrification of two successive samples in 45 seconds• Optimised for CryoCapsules®• Open system – flexible to use: also compatible with the various sample carriers (carriers of 3, 4 or 6mm tubes etc. existing in the market• The only existing commercial solution for live CLEM (Correlative Light and Electron Microscopy)• Live samples imaging up to 10 minutes• 1 clamp 3mm diameter• 1 clamp for CryoCapsules®• 1 kit of spare parts (03 heated collars, thermocouple sensor, 10 seals)• Station for unloading sample
£0.00Price On Request -
HS-010 head module storage box
HS-010 head storage box for maintaining sputtering or carbon modules under vacuum when not in use.
Price On Request £0.00 Add to basket
HS-010 head module storage box
HS-010 head storage box for maintaining sputtering or carbon modules under vacuum when not in use.
£0.00Price On Request -
HS-100MG AFM XYZ calibration standard 100nm Z – unmounted
HS-100MG AFM XYZ calibration standard, 100nm Z – unmounted (each)
£235.54 Add to basket
HS-100MG AFM XYZ calibration standard 100nm Z – unmounted
HS-100MG AFM XYZ calibration standard, 100nm Z – unmounted (each)
£235.54 -
HS-20MG AFM XYZ calibration standard 20nm Z – unmounted
HS-20MG AFM XYZ calibration standard, 20nm Z – unmounted (each)
£235.54 Add to basket
HS-20MG AFM XYZ calibration standard 20nm Z – unmounted
HS-20MG AFM XYZ calibration standard, 20nm Z – unmounted (each)
£235.54 -
HS18 Hitachi stub extender assembly with locking nut
EM-Tec HS18 Hitachi stub extender assembly with locking nut, M6/M4 – 18mm L (each)
£26.11 Add to basket
HS18 Hitachi stub extender assembly with locking nut
EM-Tec HS18 Hitachi stub extender assembly with locking nut, M6/M4 – 18mm L (each)
£26.11 -
I15H ISI/ABT/Topcon adaptor for Hitachi M4 stubs – Ø15 x 10mm
EM-Tec I15H ISI/ABT/Topcon adaptor for Hitachi M4 stubs, Ø15 x 10mm (each)
£17.55 Add to basket
I15H ISI/ABT/Topcon adaptor for Hitachi M4 stubs – Ø15 x 10mm
EM-Tec I15H ISI/ABT/Topcon adaptor for Hitachi M4 stubs, Ø15 x 10mm (each)
£17.55 -
iLO liftout software (VS5)
Drag & drop control software optimized for TEM sample lift out. The iLO Graphic User Interface provides an intuitive and seamless way of positioning the MM3A-EM micromanipulator tip or MGS2 microgripper on the specimen, lifting it out and attaching to the desired receptacle.The tool tip is positioned by simple drag & drop actions while the tip’s motion is automatically adjusted for the currently active beam, the beam’s rotation, as well as the magnification. The software provides a new action button that executes a perfectly vertical lift-out motion. It also integrates a convenient park & restore function as well as a stand-by position providing an intermediate ‘parking’ position within the microscope’s field of view where the needle can be placed between liftouts.Control for the MGS2-EM microgripper is also supported by iLO. Similarly the Rotip-EM rotational tip can also be operated via the software. After calibration, the RoTip can perform continuous compucentric rotation.
Price On Request £0.00 Add to basket
iLO liftout software (VS5)
Drag & drop control software optimized for TEM sample lift out. The iLO Graphic User Interface provides an intuitive and seamless way of positioning the MM3A-EM micromanipulator tip or MGS2 microgripper on the specimen, lifting it out and attaching to the desired receptacle.The tool tip is positioned by simple drag & drop actions while the tip’s motion is automatically adjusted for the currently active beam, the beam’s rotation, as well as the magnification. The software provides a new action button that executes a perfectly vertical lift-out motion. It also integrates a convenient park & restore function as well as a stand-by position providing an intermediate ‘parking’ position within the microscope’s field of view where the needle can be placed between liftouts.Control for the MGS2-EM microgripper is also supported by iLO. Similarly the Rotip-EM rotational tip can also be operated via the software. After calibration, the RoTip can perform continuous compucentric rotation.
£0.00Price On Request -
Indium target – Ø38 x 0.5mm disc, 99.99% In
Indium sputter coater target – Ø38 x 0.5mm disc, 99.99% In (each)
Price On Request £183.72 Add to basket
Indium target – Ø38 x 0.5mm disc, 99.99% In
Indium sputter coater target – Ø38 x 0.5mm disc, 99.99% In (each)
£183.72Price On Request -
Indium target – Ø54 x 0.2mm disc, 99.99% In
Indium sputter coater targe – Ø54 disc, 99.99% In
Price On Request £128.60 Add to basket
Indium target – Ø54 x 0.2mm disc, 99.99% In
Indium sputter coater targe – Ø54 disc, 99.99% In
£128.60Price On Request -
Indium target – Ø54 x 0.5mm disc, 99.99% In
Indium sputter coater targe – Ø54 disc, 99.99% In
Price On Request £229.65 Add to basket
Indium target – Ø54 x 0.5mm disc, 99.99% In
Indium sputter coater targe – Ø54 disc, 99.99% In
£229.65Price On Request -
Indium target – Ø57 x 0.2mm disc, 99.99% In
Indium sputter coater target – Ø57 x 0.20mm disc, 99.99% In (each)
Price On Request £128.60 Add to basket
Indium target – Ø57 x 0.2mm disc, 99.99% In
Indium sputter coater target – Ø57 x 0.20mm disc, 99.99% In (each)
£128.60Price On Request -
Indium target – Ø57 x 0.5mm disc, 99.99% In
Indium sputter coater target, Ø57 x 0.5mm disc, 99.99% In (each)
Price On Request £229.65 Add to basket
Indium target – Ø57 x 0.5mm disc, 99.99% In
Indium sputter coater target, Ø57 x 0.5mm disc, 99.99% In (each)
£229.65Price On Request