EM Products
Filter By
Showing 2656–2670 of 2914 results
-
Tergeo-Plus plasma cleaner, 150W
Tergeo-plus plasma cleaner 150W 13.56MHz. Thick walled (5mm) quartz tube with inner diameter of 160mm and an outer diameter of 170mm and a depth of 280mm. In-situ plasma source for immersion mode cleaning. Plasma sensor for quantitative plasma intensity measurement. 150W 13.56MHz high frequency RF supply with auto-matching. Adjustable from 1 to 150W at 1W intervals. No pulsing mode. 7inch resistive LCD industrial touchscreen controller. Fully automatic operation with 20 recipe support. Job sequence mode operation for executing three cleaning steps. Two mass flow controller (MFC) regulated gas inputs (supports up to three MFC upon request). Corrosion resistant Pirani pressure sensor. Venting/purging port with electronic solenoid valve (Swagelock 1/4″ compression fitting). Pumping port with electronic shut off valve and standard NW/KF25 vacuum port.
Price On Request £0.00 Add to basket
Tergeo-Plus plasma cleaner, 150W
Tergeo-plus plasma cleaner 150W 13.56MHz. Thick walled (5mm) quartz tube with inner diameter of 160mm and an outer diameter of 170mm and a depth of 280mm. In-situ plasma source for immersion mode cleaning. Plasma sensor for quantitative plasma intensity measurement. 150W 13.56MHz high frequency RF supply with auto-matching. Adjustable from 1 to 150W at 1W intervals. No pulsing mode. 7inch resistive LCD industrial touchscreen controller. Fully automatic operation with 20 recipe support. Job sequence mode operation for executing three cleaning steps. Two mass flow controller (MFC) regulated gas inputs (supports up to three MFC upon request). Corrosion resistant Pirani pressure sensor. Venting/purging port with electronic solenoid valve (Swagelock 1/4″ compression fitting). Pumping port with electronic shut off valve and standard NW/KF25 vacuum port.
£0.00Price On Request -
Thermally Insulated low-current measurement kit
A plug-in tool for the MM3A-EM to allow low-current, low-capacity measurements on conductive samples with a temperature of up to 200° C. Each kit consists of a probe tip holder, vacuum and air-side triax cabling and a vacuum feedthrough. A vacuum flange and an operator’s handbook is also included with each delivery. One kit required per MM3A.
Price On Request £0.00 Add to basket
Thermally Insulated low-current measurement kit
A plug-in tool for the MM3A-EM to allow low-current, low-capacity measurements on conductive samples with a temperature of up to 200° C. Each kit consists of a probe tip holder, vacuum and air-side triax cabling and a vacuum feedthrough. A vacuum flange and an operator’s handbook is also included with each delivery. One kit required per MM3A.
£0.00Price On Request -
Third MFC regulated gas input
3rd MFC regulated gas input
Price On Request £0.00 Add to basket
-
Third MFC regulated gas input
Third MFC regulated gas input
Price On Request £0.00 Add to basket
-
Third MFC regulated gas input
Third MFC regulated gas input
Price On Request £0.00 Add to basket
-
Three encoded micromanipulator with RoTip2 for electron microscopy
Three Encoded Micromanipulator with RoTip2 for electron microscopy (NC5.2 ) – Encoded four-axis micromanipulator system for electron microscopy. The system includes control electronics- a joypad- iLO control software- tip holders for probe tips- sample probe tips- a vacuum feedthrough and an operator’s handbook.
Price On Request £0.00 Add to basket
Three encoded micromanipulator with RoTip2 for electron microscopy
Three Encoded Micromanipulator with RoTip2 for electron microscopy (NC5.2 ) – Encoded four-axis micromanipulator system for electron microscopy. The system includes control electronics- a joypad- iLO control software- tip holders for probe tips- sample probe tips- a vacuum feedthrough and an operator’s handbook.
£0.00Price On Request -
Three encoded micromanipulators for electron microscopy
Three Encoded Micromanipulators for electron microscopy – Encoded three-axis micromanipulator system for electron microscopy. The system includes control electronics- iLO control software- tip holders for probe tips- sample probe tips- a vacuum feedthrough and an operator’s handbook.
Price On Request £0.00 Add to basket
Three encoded micromanipulators for electron microscopy
Three Encoded Micromanipulators for electron microscopy – Encoded three-axis micromanipulator system for electron microscopy. The system includes control electronics- iLO control software- tip holders for probe tips- sample probe tips- a vacuum feedthrough and an operator’s handbook.
£0.00Price On Request -
Three micromanipulators for electron microscopy (NC5.2 & VFS5)
Three-axis micromanipulator system for electron microscopy. The system includes control electronics, a joypad, PC software, tip holders for probe tips, sample probe tips, a vacuum feedthrough and an operator’s handbook.
Price On Request £0.00 Add to basket
Three micromanipulators for electron microscopy (NC5.2 & VFS5)
Three-axis micromanipulator system for electron microscopy. The system includes control electronics, a joypad, PC software, tip holders for probe tips, sample probe tips, a vacuum feedthrough and an operator’s handbook.
£0.00Price On Request -
Three micromanipulators for life science
Three three-axis micromanipulators for ife science. The system includes control electronics, a joypad, PC software, pipette holders, a connector system for the air pressure tube and headstage, a magnetic mounting foot, a light microscope mounting plate and an operator’s handbook.
Price On Request £0.00 Add to basket
Three micromanipulators for life science
Three three-axis micromanipulators for ife science. The system includes control electronics, a joypad, PC software, pipette holders, a connector system for the air pressure tube and headstage, a magnetic mounting foot, a light microscope mounting plate and an operator’s handbook.
£0.00Price On Request -
Three Micromanipulators for light Microscopy
Three Micromanipulators for light Microscopy – Three-axis micromanipulator system for light microscopy. The system includes control electronics- a joypad- PC software- tip holders for probe tips- sample probe tips- a glass needle holder- sample glass needles- a magnetic mounting foot- a light microscope mounting plate and an operator’s handbook.
Price On Request £0.00 Add to basket
Three Micromanipulators for light Microscopy
Three Micromanipulators for light Microscopy – Three-axis micromanipulator system for light microscopy. The system includes control electronics- a joypad- PC software- tip holders for probe tips- sample probe tips- a glass needle holder- sample glass needles- a magnetic mounting foot- a light microscope mounting plate and an operator’s handbook.
£0.00Price On Request -
Ti sample holder disc, Ø3 x 0.3mm – 1.2 x 1.8mm hole
Ti sample holder disc, Ø3 x 0.3mm – 1.2 x 1.8mm hole (each)
£8.68 Add to basket
Ti sample holder disc, Ø3 x 0.3mm – 1.2 x 1.8mm hole
Ti sample holder disc, Ø3 x 0.3mm – 1.2 x 1.8mm hole (each)
£8.68 -
Tilt rotation manipulator for Phenom desktop SEM
Tilt-rotation manipulator for Phenom desktop microscope, including positioner. Tilt range +90° to -3°, optional limit to +3° and -3°. Additional rotation axis for 360° free rotation of the specimen.
Price On Request £0.00 Add to basket
Tilt rotation manipulator for Phenom desktop SEM
Tilt-rotation manipulator for Phenom desktop microscope, including positioner. Tilt range +90° to -3°, optional limit to +3° and -3°. Additional rotation axis for 360° free rotation of the specimen.
£0.00Price On Request -
Tilt rotation manipulator with encoded axes
Tilt-rotation manipulator with encoded axes for Phenom desktop microscopes, including positioner. Tilt range is +90° to -90° and there is an additional rotation axis for 360° free rotation of the specimen. Both axes are encoded with 0.2° absolute accuracy.
Price On Request £0.00 Add to basket
Tilt rotation manipulator with encoded axes
Tilt-rotation manipulator with encoded axes for Phenom desktop microscopes, including positioner. Tilt range is +90° to -90° and there is an additional rotation axis for 360° free rotation of the specimen. Both axes are encoded with 0.2° absolute accuracy.
£0.00Price On Request -
Tilting platform for Phenom desktop SEM
Tilting platform with positioner for Phenom desktop microscope. Tilt range +90° to -3°. Optional limit to +3° and -3°.
Price On Request £0.00 Add to basket
Tilting platform for Phenom desktop SEM
Tilting platform with positioner for Phenom desktop microscope. Tilt range +90° to -3°. Optional limit to +3° and -3°.
£0.00Price On Request -
Tin target – Ø54 x 0.20mm disc, 99.99% Sn
Tin sputter coater target – Ø54 x 0.20mm disc, 99.99% Sn
Price On Request £91.86 Add to basket
Tin target – Ø54 x 0.20mm disc, 99.99% Sn
Tin sputter coater target – Ø54 x 0.20mm disc, 99.99% Sn
£91.86Price On Request